Tubing Connectors and Fittings
AVANTOR MASTERFLEX (VWR LLC) PIPE PLUGS M 3/4FTFT 10/PK
Masterflex Fitting, HDPE, Straight, Threaded Plug, 3/4IN NPT(M)10/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Elbow, Hose Barb to Threaded Adapter, 1/4"" ID x 3/8"" NPT(M); 100 PK
Barbed elbow fittings are designed for quick and easy assembly without tools. Combine these simple and economical fittings with our flexible tubing for use in your low-pressure applications (generally less than 30 psi).
AVANTOR MASTERFLEX (VWR LLC) PIPE ADAPT M1/2FTFTX3/8FTFT 10
Masterflex Fitting, Polypropylene, Straight, Hosebarb to Thread, 3/8IN ID x 1/2IN NPT(M)10/PK, Avantor
Microsolv Technology Corporation Tubing Connector Fittings, Low Pressure, 1/16", Polypropylene, Blue with 1/4-28 Screw Threads, for use with flanged, polymeric tubing. 10/PK.
These "Male Nuts" are used to connect polymeric tubing in the low pressures zones of HPLC systems and other low pressure, fluidic uses. Tubing must be flanged and Washers are required to work properly, and sold separately.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Tee, Hose Barb Union, 5/8"" ID; 100/PK
Barbed tee fittings are designed for quick and easy assembly. Combine these simple, economical fittings with our flexible tubing for use in your low-pressure applications (generally less than 30 psi).
AVANTOR MASTERFLEX (VWR LLC) MF PVDF MINITRI X 3/4 BRB 6/PK
Masterflex Fitting, PVDF, Straight, Sanitary Clamp to Hose Barb Adapter, Mini Tri-Clamp x 3/4IN IN ID; 6/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Straight, Hose Barb Reducer, 1"" ID x 5/8"" ID; 5/PK
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.
AVANTOR MASTERFLEX (VWR LLC) FITTING KIT NATURAL PP
Masterflex Fitting Kit, Polypropylene, Elbow/Tee/Nipple/Plug, Threaded Adapter to Hosebarb, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Elbow, Hose Barb to Threaded Adapter, 1/4"" ID x 3/8"" NPT(M); 10 PK
Barbed elbow fittings are designed for quick and easy assembly without tools. Combine these simple and economical fittings with our flexible tubing for use in your low-pressure applications (generally less than 30 psi).
Chemglass Life Sciences PFA 90° Adapter, 1/4" Compression to 1/4" NPT
PFA 90¿ Adapter, 1/4" Compression to 1/4" NPT. PFA 90¿ adapter, compression to male NPT fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the fitting assembly and tightening the nut.
Grainger Union Elbow 3/8 in PK10
The Parker 16W610 Union Elbow is a composite union elbow fitting for use in fluid transfer applications. It has a maximum pressure rating of 300 PSI at 73°F. The body material is made from reinforced nylon composite for corrosion resistance. It has a 1/4" NPT female thread on each end to allow connection to 1/4" NPT threaded male fittings. The elbow offers a 90 degree change of direction in piping or tubing runs. It can be used with air, water, oil and inert gas applications. The elbow is rated for temperatures from -40°F to 180°F.
AVANTOR MASTERFLEX (VWR LLC) RED.NIPPLE 1/2FTFTX1/4FTFTMPT
Masterflex Fitting, Polyethylene, Straight, Thread Reducer, 1/4IN NPT(M) 1/2IN NPT(M)10/PK, Avantor